Identification of hydrogen selenide and other volatile selenols by derivatization with 1-fluoro-2,4-dinitrobenzene

A procedure is described for the trapping and identification of hydrogen selenide and methyl selenol ( CH3SeH ). The volatile selenols were generated by reducing selenious acid or dimethyldiselenide with Zn dust and hydrochloric acid under a stream of nitrogen and passing into a trapping solution composed of 50 mM 1-fluoro-2,4-dinitrobenzene plus 83 mM sodium bicarbonate in 67% dimethylformamide:33% water. The selenols react rapidly to form stable dinitrophenyl (DNP) selenoethers that can be extracted into benzene; these are easily identified by TLC, HPLC, or mass spectrometry. Hydrogen selenide is trapped in 90-99% yield, primarily as the di-DNP- monoselenide with a trace of di-DNP- diselenide .     

Preparation of Nucleoside H-Phosphonoselenoate Monoesters Via the Phosphinate Approach

An efficient entry to nucleoside 3′-H-phosphonoselenoate monoesters via phosphinate intermediates was developed. It involves a reaction of suitably protected nucleosides with triethylammonium phosphinate in the presence of pivaloyl chloride, followed by selenization of the intermediate nucleoside phosphinates with triphenylphosphine selenide, to produce the corresponding nucleoside H-phosphonoselenoates in 86–92% yields.     

High Thermoelectric Performance in p‐type Polycrystalline Cd‐doped SnSe Achieved by a Combination of Cation Vacancies and Localized Lattice Engineering

Herein, a high figure of merit (ZT) of ≈1.7 at 823 K is reported in p‐type polycrystalline Cd‐doped SnSe by combining cation vacancies and localized‐lattice engineering. It is observed that the introduction of Cd atoms in SnSe lattice induce Sn vacancies, which act as p‐type dopants. A combination of facile solvothermal synthesis and fast spark plasma sintering technique boosts the Sn vacancy to a high level of ≈2.9%, which results in an optimum hole concentration of ≈2.6 × 10¹⁹ cm^?3 and an improved power factor of ≈6.9 µW cm^?1 K^?2. Simultaneously, a low thermal conductivity of ≈0.33 W m^?1 K^?1 is achieved by effective phonon scattering at localized crystal imperfections, as observed by detailed structural characterizations. Density functional theory calculations reveal that the role of Cd atoms in the SnSe lattice is to reduce the formation energy of Sn vacancies, which in turn lower the Fermi level down into the valence bands, generating holes. This work explores the fundamental Cd‐doping mechanisms at the nanoscale in a SnSe matrix and demonstrates vacancy and localized‐lattice engineering as an effective approach to boosting thermoelectric performance. The work provides an avenue in achieving high‐performance thermoelectric properties of materials.     

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H₂O₂). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X‐ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol?hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram‐positive or Gram‐negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.     

Encapsulating Trogtalite CoSe2 Nanobuds into BCN Nanotubes as High Storage Capacity Sodium Ion Battery Anodes

Trogtalite CoSe₂ nanobuds encapsulated into boron and nitrogen codoped graphene (BCN) nanotubes (CoSe₂@BCN‐750) are synthesized via a concurrent thermal decomposition and selenization processes. The CoSe₂@BCN‐750 nanotubes deliver an excellent storage capacity of 580 mA h g^?1 at current density of 100 mA g^?1 at 100th cycle, as the anode of a sodium ion battery. The CoSe₂@BCN‐750 nanotubes exhibit a significant rate capability (100–2000 mA g^?1 current density) and high stability (almost 98% storage retention after 4000 cycles at large current density of 8000 mA g^?1). The reasons for these excellent storage properties are illuminated by theoretical calculations of the relevant models, and various possible Na⁺ ion storage sites are identified through first‐principles calculations. These results demonstrate that the insertion of heteroatoms, B–C, N–C as well as CoSe₂, into BCN tubes, enables the observed excellent adsorption energy of Na⁺ ions in high energy storage devices, which supports the experimental results.     

Mercury's neurotoxicity is characterized by its disruption of selenium biochemistry

Background

Methylmercury (CH₃Hg⁺) toxicity is characterized by challenging conundrums: 1) “selenium (Se)-protective” effects, 2) undefined biochemical mechanism/s of toxicity, 3) brain-specific oxidative damage, 4) fetal vulnerability, and 5) its latency effect. The “protective effects of Se” against CH₃Hg⁺ toxicity were first recognized >50?years ago, but awareness of Se's vital functions in the brain has transformed understanding of CH₃Hg⁺ biochemical mechanisms. Mercury's affinity for Se is ~1 million times greater than its affinity for sulfur, revealing it as the primary target of CH₃Hg⁺ toxicity.

Realizing High Thermoelectric Performance in n‐Type Highly Distorted Sb‐Doped SnSe Microplates via Tuning High Electron Concentration and Inducing Intensive Crystal Defects

In this study, a record high figure of merit (ZT) of ≈1.1 at 773 K is reported in n‐type highly distorted Sb‐doped SnSe microplates via a facile solvothermal method. The pellets sintered from the Sb‐doped SnSe microplates show a high power factor of ≈2.4 µW cm^?1 K^?2 and an ultralow thermal conductivity of ≈0.17 W m^?1 K^?1 at 773 K, leading a record high ZT. Such a high power factor is attributed to a high electron concentration of 3.94 × 10¹⁹ cm^?3 via Sb‐enabled electron doping, and the ultralow thermal conductivity derives from the enhanced phonon scattering at intensive crystal defects, including severe lattice distortions, dislocations, and lattice bent, observed by detailed structural characterizations. This study fills in the gaps of fundamental doping mechanisms of Sb in SnSe system, and provides a new perspective to achieve high thermoelectric performance in n‐type polycrystalline SnSe.     

Identification of biogenic dimethyl selenodisulfide in the headspace gases above genetically modified Escherichia coli

Escherichia coli JM109 cells were modified to express the genes encoded in a 3.8-kb chromosomal DNA fragment from a metalloid-resistant thermophile, Geobacillus stearothermophilus V. Manual headspace extraction was used to collect the gases for gas chromatography with fluorine-induced sulfur chemiluminescence analysis while solid-phase microextraction was used for sample collection in gas chromatography/mass spectrometry (GC/MS) analysis. When grown in the presence of selenate or selenite, these bacteria produced both organo-sulfur and organo-selenium in the headspace gases above the cultures. Organo-sulfur compounds detected were methanethiol, dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide. Organo-selenium compounds detected were dimethyl selenide and dimethyl diselenide. Two mixed sulfur-selenium compounds, dimethyl selenenyl sulfide and a chromatographically late-eluting compound, were detected. Dimethyl selenodisulfide, CH(3)SeSSCH(3), and dimethyl bis(thio)selenide, CH(3)SSeSCH(3), were synthesized and analyzed by GC/MS and fluorine-induced chemiluminescence to determine which corresponded to the late-eluting compound that was bacterially produced. CH(3)SeSSCH(3) was positively identified as the compound detected in bacterial headspace above Se-amended cultures. Using GC retention times, the boiling point of CH(3)SeSSCH(3) was estimated to be approximately 192 degrees C. This is the first report of CH(3)SeSSCH(3) produced by bacterial cultures.     

Are Binary Copper Sulfides/Selenides Really New and Promising Thermoelectric Materials?

Copper sulfides and copper selenides have recently been reported as new and promising low‐cost and environmentally friendly thermoelectric materials. Here, it is shown that these materials have actually been studied for more than 190 years and the absence of commercial thermoelectric modules based on them stems from some major intrinsic issues related to these chalcogenides. Further development of these semiconductors will require addressing and solving these problems before large scale utilization can be considered.